8.27. Разобрать

8.27.1. Обзор

Рисунок 16.203. Разборка изображений (RGB)

Разборка изображений (RGB)

Исходное изображение

Разборка изображений (RGB)

Применение команды «Разобрать» (разборка в RGB) без выбора параметра Разобрать по слоям.


Рисунок 16.204. Разбор на слои (RGB)

Разбор на слои (RGB)

Исходное изображение

Разбор на слои (RGB)

Применение команды «Разобрать» (разборка RGB) с выбором параметра Разобрать по слоям.


Эта команда разделяет каналы изображения (RGB, HSV, CMYK и тп) на отдельные изображения или на слои.

[Примечание] Примечание

This command only works on RGB images. If the image is Grayscale or Indexed, the menu entry is disabled.

8.27.2. Активация команды

  • Эту команду можно найти в меню изображения ЦветСоставляющиеРазобрать….

8.27.3. Параметры

Рисунок 16.205. Параметры фильтра «Разобрать»

Параметры фильтра «Разобрать»

Извлечь канал

Следующие параметры описываются для выбранного параметра Разобрать по слоям.

Цветовая модель
RGB

If the RGB option is chosen, a gray level image is created with three layers (Red, Green and Blue), and two channels (Gray and Alpha).

This function is interesting when using the Threshold tool. You can also perform operations like cutting, pasting or moving selections in a single RGB channel. You can use an extracted grayscale layer as a selection or mask by saving it in a channel (select the whole or a part of the layer, then SelectSave to a channel ).

RGBA

If the RGBA option is chosen, an image is created similar to the RGB Decomposing with an additional Alpha layer filled with the transparency values of the source image. Fully transparent pixels are black and fully opaque pixels are white.

Альфа

This option extracts the image transparency stored in the Alpha channel in the Channel dialog in a separate image. The fully transparent pixels are Black the fully opaque pixels are white. The graytones are smooth transitions of the transparency in the source image.

HSV

This option decomposes image into three grayscale layers, one for Hue, one for Saturation and another for Value.

Although Hue is grayscale, it does represent hues. In color circle, white and black are starting and arrival points and are superimposed. They represent Red color at top of circle. Gray intermediate levels are corresponding to intermediate hues on circle: dark gray to orange, mid gray to green and light gray to magenta.

Насыщенность и Значение: белый цвет имеет максимальную насыщенность (чистый цвет) и максимальное значение (очень яркий). Чёрный имеет минимальную насыщенность (белый) и минимальное значение (чёрный).

HSL

Этот параметр похож на параметр HSV. Вместо Value (значения), третий слой содержит составляющую изображения L (luminosity, светлота).

CMYK

This option decomposes an image into four grayscale layers, one for Yellow, one for Magenta, one for Cyan, and one for Black.

This option can be useful to transfer an image into printing software with CMYK capabilities.

LAB

This option decomposes image into three grayscale layers, layer «L» for Luminance, layer «A» for colors between green and red, layer «B» for colors between blue and yellow.

Разбор в LAB — это цветовая модель, принадлежащая к семейству моделей «светимость-цвет». Один канал используется для яркости, остальные два — для цветов. Эта цветовая модель используется в приложении Photoshop.

LCH

This option decomposes image into three grayscale layers, layer «L» for Luminance, layer «C» for Chroma, and layer «H» for Hue.

The LCH Decomposing is a color model of the Luminance-Color family.

YCbCr ITU R470, YCbCr ITU R470 256, YCbCr ITU R709, YCbCr ITU R709 256

In GIMP there are four YCbCr decompositions with different values. Each option decomposes an image in three grayscale layers, a layer for Luminance and the other two layers for blueness and redness.

The YCbCr color model, also called YUV, is now used for digital video (initially for PAL analog video). It's based on the idea that the human eye is most sensitive to luminosity, next to colors. The YCbCr Decomposing uses a transformation matrix and the different options are different values recommended by ITU (International Telecommunication Union) applied to the matrix.

Разобрать по слоям

If this option is checked, a new grayscale image is created, with each layer representing one of the channels of the selected mode. If this option is unchecked, every channel is represented in its own image and clearly named in the name bar.

Цвет переднего плана для меток приводки

Пример 16.1. Обрезные метки

Исходное изображение

Составляющая неонового голубого

Составляющая чёрного

(Составляющие для пурпурного и жёлтого отбрасываются.)


Этот параметр предназначен для специалистов и относится к печати CMYK. Если параметр отмечен, то в каждой составляющей разобранного изображения/слоя каждый пиксель текущего цвета переднего плана будет чёрным. Это даёт возможность делать метки для обрезания видимыми во всех каналах, значительно облегчая выравнивание. Для проверки точности выравнивания печатных плат также можно использовать чёрные тонкие крестики — метки приводки.