Falls Sie nicht wissen, was man in GIMP unter einem Pfad versteht, lesen Sie Abschnitt 5, „ Mit Pfaden arbeiten “.
Der Pfaddialog wird benutzt, um Pfade zu erstellen oder zu löschen, zu verwalten, sie in Auswahlen umzuwandeln oder aus Auswahlen zu erzeugen.
Der Dialog „Ablagen“ ist dockbar. Informationen hierzu finden Sie im Abschnitt Abschnitt 2.3, „Docks und Dialoge“.
Er kann auf verschiedene Arten aufgerufen werden:
From the main menu, as
→ → .from the Tab menu in any dockable dialog by clicking on and selecting → .
In the detached windows which exists only if at least one dialog remains open. In this case, you can raise the „Paths“ dialog from the main menu: → .
menu, there is a list ofEach path belongs to one image: paths are components of images just like layers. The Paths dialog shows you a list of all paths belonging to the currently active image: switching images causes the dialog to show a different list of paths. In multi-window mode, you can show the name of the active image at the top of the dock by choosing „Show Image Selection“ from the Tab menu.
If you are familiar with the Layers dialog, you have a head start, because the Paths dialog is in several ways similar.
At the top, there are two „Lock“ icons:
A „path“ icon tells us whether editing the current path is locked (disabled) or not. Clicking the icon toggles between enabled and disabled.
Anmerkung | |
---|---|
Until GIMP 2.10.32 this was called Lock Path Strokes. That name was considered ambiguous, because the term strokes is also used for stroking lines along a path, which this option does not change. |
A „cross with arrows“ icon tells us whether the current path position is locked (disabled) or not. When the path position is locked, the path can't be moved. Clicking the icon toggles between enabled and disabled.
The Paths dialog itself shows a list of all paths that exist in the image, with four items for each path:
Die Sichtbarkeit eines Pfades wird durch ein Augensymbol gekennzeichnet. Um den Pfad aus dem aktiven Bild auszublenden, klicken Sie mit der linken Maustaste auf das Auge. Um den Pfad wieder sichtbar werden zu lassen, klicken Sie noch einmal mit der linken Maustaste auf den linken Bereich in der Pfadliste, damit das Augensymbol wieder erscheint.
Um mehrere Pfade zu verschieben, können diese verkettet werden. Klicken Sie auf das Kettensymbol (links neben dem Ebenennamen), um eine Ebene zu verketten. Wiederholen Sie diesen Schritt mit jeder Ebene, die Sie z.B. gemeinsam verschieben wollen. Um die Verkettung zu lösen, klicken Sie auf das Kettensymbol, so dass es verschwindet.
Ein kleines Miniaturbild zeigt eine Skizze des Pfades. Ziehen Sie das Miniaturbild auf das aktuelle Bild, um eine Kopie des Pfades zu erstellen.
Der Name des Pfades kann durch einen Doppelklick verändert werden. Der Name muss eindeutig sein, d.h. er kann nicht zweimal im Pfaddialog vergeben werden.
Jedes Bild hat einen aktiven Pfad (angezeigt durch eine Markierung), sobald der Pfaddialog eine nichtleere Liste zeigt. Dieser Pfad kann mit Funktionen, die mit dem Knopf am unteren Ende des Dialogs aufgerufen werden können, verändert werden.
Durch einen Rechtsklick (Linksklick auf einem Apple Macintosh) kann das Pfadkontexmenü aufgerufen werden. Das Kontextmenü kann ebenso aus dem Reitermenü aufgerufen werden.
Die unteren Knöpfe der Dialoge korrespondieren mit den gleichen Funktionen im Kontextmenü.
See New Path. Holding down Shift makes a new (empty) path with the last used values, without opening the New Path dialog.
See Raise Path. Holding down Shift moves the path to the top of the list.
See Lower Path. Holding down Shift moves the path to the bottom of the list.
See Duplicate Paths.
Converts paths into a selection; see Paths to Selection for a full explanation. You can use modifier keys to set the way the new selection interacts with the existing selection:
Taste | Aktion |
---|---|
Nichts | Aktive Auswahl ersetzen. |
Umschalt | Zur Auswahl hinzufügen. |
Strg | Von Auswahl subtrahieren. |
Umschalt+Strg | Schnittmenge mit Auswahl bilden. |
Holding down Shift brings up the Advanced Options dialog, which probably is only useful to GIMP developers.
See Stroke Paths. Holding down Shift strokes the path based on the last used values without opening the Stroke Paths dialog.
Delete Path deletes the currently selected path.
Das Pfadmenü öffnen Sie im Pfaddialog, entweder mit einem Rechstklick auf einen Pfadeintrag oder über
im Reitermenü. Das Menü ermöglicht Ihnen den Zugriff auf die meisten Pfad-bezogenen Operationen.Edit Path is an alternative way to activate the Paths tool, used for creating and manipulating paths. It can also be activated from the Toolbox, or by using the keyboard shortcut B.
Durch den Klick auf Pfadeigenschaften erscheint ein neuer Dialog zum Verändern des Pfadnamens. Es ist ebenfalls möglich, den Dialog per Doppelklick zu öffnen.
Color Tag brings up a sub menu, similar to the one in the Layers Dialog, that allows you to select a color tag for the selected path.
Neuer Pfad erstellt einen neuen Eintrag in der Pfadliste. Der neue Pfad wird automatisch zum aktiven Pfad, welcher markiert in der Liste erscheint. Der neue Pfad besitzt noch keine Knotenpunkte, die Sie selbst hinzufügen müssen, um einen Pfad zu erstellen.
Pfad anheben verschiebt den aktuellen Pfadeintrag um einen Eintrag nach oben. Die Anordnung der Pfade in der Liste hat keine Bedeutung.
Pfad absenken verschiebt den aktuellen Pfadeintrag um Eintrag nach unten. Die Anordnung der Pfade in der Liste hat keine Bedeutung.
Duplicate Path creates a copy of the active path, assigns it a unique name, adds it to the list in the Paths dialog, and makes it the active path for the image. The copy will be visible only if the original path was visible.
Durch Drücken des Knopfs können Sie den aktiven Pfad entfernen.
Sichtbare Pfade vereinen vereint alle Pfade, die sichtbar (Augensymbol) sind, in einem Pfad.
These commands all convert the active paths into a selection, and then combine it with the existing selection in the specified ways. (Paths to Selection discards the existing selection and replaces it with one formed from the path.) If necessary, any unclosed components of the path are closed by connecting the last anchor point to the first anchor point with a straight line. The „marching ants“ for the resulting selection should closely follow the path, but don't expect the correspondence to be perfect.
Diese Funktion kann auf verschiedener Weise erreicht werden:
From the main menu, as
→Aus dem Pfaddialogmenü unter
.From the Selection to Path button at the bottom of the Paths dialog.
Pfad aus Auswahl erstellt einen neuen Pfad aus einer Auswahl. In den meisten Fällen ist die Form des Pfades ähnlich der Form der „laufenden Ameisen“.
Converting a two-dimensional selection mask into a one-dimensional path involves some rather tricky algorithms: you can alter the way it is done using the Advanced Options, which are accessed by holding down the Shift key while pressing the Selection to Path button at the bottom of the Paths dialog. This brings up the Advanced Options dialog, which allows you to set 20 different options and variables, all with cryptic names. The Advanced Options are really intended for developers only, and help with them goes beyond the scope of this documentation. Generally speaking, Selection to Path will do what you expect it to, and you don't need to worry about how it is done (unless you want to).
Diese Funktion kann auf verschiedener Weise erreicht werden:
From the main menu, as
→From the Paths dialog menu, as
.From the Fill Path button in the Tool Options for the Paths tool.
Fill Path fills all areas delimited by the path with the current foreground color or currently selected pattern. See the section about Fill Path for more information.
Diese Funktion kann auf verschiedener Weise erreicht werden:
From the main menu, as
→From the Paths dialog menu, as
.From the Paint along the path button at the bottom of the Paths dialog.
From the Stroke Path button in the Tool Options for the Paths tool.
Stroke Path renders the active path on the active layer of the image, permitting a wide variety of line styles and stroking options. See the sections about Stroke Path and Stroking for more information.
Copy Paths copies the active path to the Paths Clipboard, enabling you to paste it into a different image.
Tipp | |
---|---|
Alternativ können Sie einen Pfad auch kopieren, indem Sie das Miniaturbild des Pfades auf das Bild ziehen. |
Anmerkung | |
---|---|
When you copy a path to an image, it is not visible. You have to make it visible in the Paths dialog. |
Paste Path creates a new path from the contents of the Path Clipboard, adds it to the list in the Paths dialog, and makes it the active path for the image. If no path has previously been copied into the clipboard, the menu entry will be disabled.
Export Paths… allows you to save a path to a file: it pops up a file save dialog that allows you to specify the file name and location. You can later add this path to any GIMP image using the Import Path command. The format used for saving paths is SVG: this means that vector-graphics programs such as Sodipodi or Inkscape will also be able to import the paths you save. See the Paths section for more information on SVG files and how they relate to GIMP paths.
Import Path… creates a new path from an SVG file: it pops up a file chooser dialog that allows you to navigate to the file. See the Paths section for information on SVG files and how they relate to GIMP paths.