8.24. Mono-Mischer

8.24.1. Wirkungsweise

Abbildung 16.179. Mono-mixer applied

Mono-mixer applied

Ausgangsbild

Mono-mixer applied

Command Mono-mixer applied with default options.


[Anmerkung] Anmerkung

This command does not work on Grayscale images. If the image is Grayscale, the menu entry is disabled.

8.24.2. Aufruf des Befehls

  • You can access this command from the main menu through ColorsComponentsMono Mixer….

8.24.3. Eigenschaften

Abbildung 16.180. Mono Mixer command options

„Mono Mixer“ command options

Presets

Presets are a common feature for several Colors commands. You can find its description in Abschnitt 8.1.1, „Colors Common Features“.

Preserve luminosity

The mixing can result in an image where some of the colors are too light. This option lessens the luminosity of the color channels while keeping a good visual ratio between them. So, you can change the relative weight of the colors without changing the overall luminosity.

Red Channel Multiplier, Green Channel Multiplier, Blue Channel Multiplier

Coefficient applied to each channel. Values range from -5.000 to 5.000. As default values are equal in the three channels, image is grayed out.

Blending Options, Preview and Split view

These are common features described in Abschnitt 8.1.1, „Colors Common Features“.

8.24.4. Using Mono Mixer

When this filter is opened, the image preview turns to grayscale, but the image is still a RGB image with three channels, until the OK button is pressed.

Abbildung 16.181. Red: 100% Green: 50% Blue: 0%. Preserve Luminosity unchecked.

Red: 100% Green: 50% Blue: 0%. Preserve Luminosity unchecked.

In jedem Quadrat wurden die Pixel in eine Graustufe gleich dem Wert des roten Kanals dieser Pixel umgewandelt (der Hintergrund wurde eingefärbt, um alle Quadrate sichtbar zu machen).


Here is how the Preserve Luminosity works in the monochrome mode: For example, suppose the sliders were Red:75%, Green:75%, Blue:0%. With Preserve Luminosity disabled, the resulting picture would be at 75%+75%+0% =150%, very bright indeed. A pixel with a value of, say, R,G,B=127,100,80 would map to 127*0.75+100*0.75+80*0=170 for each channel. With Preserve Luminosity enabled, the sliders will be scaled so they always add up to 100%. In this example, that scale value is 1/(75%+75%+0%) or 0.667. So the pixel values would be about 113. The Preserve Luminosity option just assures that the scale values from the sliders always adds up to 100%. Of course, strange things happen when any of the sliders have large negative values. (from the plug-in author himself).

[Anmerkung] Anmerkung

Which channel should you modify? This depends on what you want to do. In principle, the Red channel suits contrast modifications well. The Green channel is well adapted to details changes and the Blue channel to noise, grain changes. You can use the Decompose command.